Introducción

Remove your access door to replace RAM chips or to open the case of your iMac.

  1. ZPXxoT1VNWvMvGVS
    • Lay your iMac front side down on a table with the lower edge facing yourself.

    • Loosen the single Phillips screw PH#2 in the center of the access door.

    • This screw is captive in the access door.

    • Remove the access door from your iMac.

Conclusión

To reassemble your device, follow these instructions in reverse order.

johann beda

Miembro Desde 14/09/10

2440 Reputación

0 comentarios