Motorola Triumph Camera Replacement

Escrito Por: greg
  • Comentarios: 0
Motorola Triumph Camera Replacement

Dificultad

Moderate

Pasos

9

Tiempo Requerido

No hay estimado

Introducción

This guide details the process of removing the camera from an Motorola Triumph. Installation of the camera can be accomplished by reversing the process.

  1. wjLfFNschOn3q6qy
    wjLfFNschOn3q6qy
    sGWwiFBpjxpPVM2F
    CSCRXinTFTjIfZxF

    • Slide the back cover down.

    • Lift the back cover up.

    • Pry the battery out with the spudger

  2. yBdSPVM64g3uRafU

    • Gently pry out the battery using the spudger

  3. kweYDv5pMCSrOYev

    • After removing the Battery remove the two screws with a T4 screwdriver.

  4. RUWHeVVaBOUA5vsS

    • With the spudger, go around the seam of the phone and pry away the back chassis.

  5. VOPmcNGHPgCLScO2

    • Using the T5 screwdriver, remove all the four screws shown in the picture.

  6. AT2FIRocMgaKSJx1

    • Lift up the motherboard out of the device,

  7. NvnECJxk3L55I2FM

    • Pry the speakers out using the plastic spudger.

  8. Nmc2JsVJvbtLTE6m

    • Locate the camera at the top of the motherboard.

  9. HtZuFxUWHgunuoSA
    HtZuFxUWHgunuoSA
    5AfkD3LDopoCDfhR

    • Use the the spudger to unclip the connector above the camera.

    • Remove the camera.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

greg

Miembro Desde 07/10/14

12 Reputación

0 comentarios