OnLogic CL100 mSATA SSD Replacement

Escrito Por: scx32
  • Comentarios: 0
OnLogic CL100 mSATA SSD Replacement

Dificultad

Easy

Pasos

3

Tiempo Requerido

2 minutos

Introducción

    • If there are rubber feet on the bottom of the device, remove the feet.

    • Remove the 4 screws on the bottom of the device.

    • After removing the orange pad, remove the screw holding the SSD in place and slide it right, then up.

    • While reassembling, align the SSD and slide it left.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

scx32

Miembro Desde 26/02/23

132 Reputación

0 comentarios