Raspberry Pi 3 SD Card Replacement

Escrito Por: ΛΛKΛRΞT
  • Comentarios: 2
Raspberry Pi 3 SD Card Replacement

Dificultad

Easy

Pasos

5

Tiempo Requerido

35 segundos - 5 minutos

Introducción

In this guide I will show you how to change SD card in your Raspberry Pi 3.

  1. pw3dJUodrLwYBVlc

    • The Raspberry Pi 3 should look like this closed.

  2. mGpBNURHiEfdrmDy

    • Open the top lid like I have done on the image.

    • The top is marked that you are gonna remove in the next step.

  3. OwRCkrVGgCPLcFOG

    • Now remove the cover for the two covers.

    • It should look like the image.

    • I have marked the covers for the next step.

  4. WYjHYsst5Sy2jTos

    • Remove the two sides.

    • It should look like the image.

  5. LUmYOClVCNpGJXdA
    LUmYOClVCNpGJXdA
    V5GkCnFhFdoGx1Jq

    • Now we should successfully have removed the case.

    • Notice that the side shown on the first image is the one that we are intrested in.

    • When we have flipped the Pi 3 over we can remove the SD card.

    if you follow this you may brake the sd card of the raspberry pi here is a updated guide

    step 1 flip the raspberry pi over

    step 2 remove the sd card

    step 3 put new sd card in

    step 4 flip the raspberry pi back over

    done

    Kieran jones -

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

ΛΛKΛRΞT

Miembro Desde 22/11/17

229 Reputación

Un comentario

On the official RPi case there’s a cutout where the SD card inserts. This is a pointless guide to be honest.

Stephen Wilson -