Reemplazo del ensamblaje de la pantalla LCD del Sony Xperia Z5 Compact

Escrito Por: Witrigs
  • Comentarios: 20
Reemplazo del ensamblaje de la pantalla LCD del Sony Xperia Z5 Compact

Dificultad

Moderado

Pasos

11

Tiempo Requerido

1 - 2 horas

Introducción

¿Quieres desarmar y cambiar el ensamblaje de la pantalla LCD del Sony Xperia Z5 Compact usted mismo, siguiendo esta guía?

[vídeo|https://www.youtube.com/watch?v=hrOQoOSb...]

  1. WGvwAmcj6PnEGTQF
    WGvwAmcj6PnEGTQF
    KB5PDerrVIvSCVeA

    • Apaga y retira la bandeja de la tarjeta SIM.

  2. sF4JXU1KXbSsIkoe
    sF4JXU1KXbSsIkoe
    DwRrdgdJkBmMDLci
    cUvEgywGs4DdRPux

    • Calienta la tapa trasera para ablandar el adhesivo.

    • Coloca la ventosa para abrir un espacio desde la parte superior, luego inserta púas de guitarra y deslízala para cortar el adhesivo debajo.

    • Retira la tapa trasera.

    If the adhesive strips are being heated to remove the back, does this mean the waterproof feature will no longer work?

    Andy Morley -

  3. KHZe1rdgkCsThdAH
    KHZe1rdgkCsThdAH
    YvPewMdPNfw1ejDZ

    • Desenrosca 10 tornillos Phillips todos.

    • Afloja el clip NFC y el clip de la linterna.

  4. MhqO2jpdvBXJaYaT
    MhqO2jpdvBXJaYaT
    cPAcl5qAxJW4xZIQ
    LAaqVTncGYu1vyAX

    • Retira el soporte de plástico.

    • Haz palanca y retira el marco trasero.

  5. l12nW4QB3Gtxkuvq
    l12nW4QB3Gtxkuvq
    NYI62cVsTOWiFswD
    SRg5CBf3VdZKImuS

    • Retira la cámara frontal.

  6. 2lYTXYDJLAxUGxMo
    2lYTXYDJLAxUGxMo
    LZVK3fEBFCbmheZS
    lIKbpGbsImAiIxCx

    • Retira la cámara trasera.

  7. cWfHHkoGoTPlvDpB
    cWfHHkoGoTPlvDpB
    FAnlFY4wKKGjPBST

    • Retira el altavoz.

  8. ErjtS3FMd4HTFNSU
    ErjtS3FMd4HTFNSU
    QFvMONSWIUGebQee
    vSHmo2FHQaEGAVqC

    • Suelte el conector del puerto de carga.

    • Retire la barra protectora de plástico.

    • Haga palanca en el ensamblaje de la placa base desde este lado. Hay tres conectores flexibles que conectan la placa base debajo. Así que levante suavemente el conjunto de la placa base.

    I believe bottom microphone should also be disconnected from chassis at this point (before prying up the motherboard)

    BX81 -

  9. vfnUODBSbt5IaAte
    vfnUODBSbt5IaAte
    FYeePieEIvlxLJtl
    ZUkTOLJI56ZigeEy

    • Saca el conector de audio de la ranura, sin adhesivo debajo.

    • Suelta el conector flexible de la pantalla LCD y el conector flexible principal levantando la lengüeta de bloqueo blanca de la base del conector.

    • Separa el conjunto de la placa base de la carcasa intermedia.

  10. lodLThLjDEcaYlVX
    lodLThLjDEcaYlVX
    qnAhxAmELnpjX1rA
    SH6pNXkUSOacthJh

    • La etiqueta debajo del ensamblaje de la pantalla LCD es un poco fuerte, así que use una pistola de aire caliente para suavizarla durante unos minutos.

    • Retira la pantalla LCD con el ensamblaje del digitalizador con cuidado.

  11. e5tDVMaXWDVuaitN

    • Hecho.

Conclusión

Para volver a armar su dispositivo, sigue estas instrucciones en orden inverso.

Autor

Witrigs

Miembro Desde 24/11/15

68660 Reputación

18 comentarios

But what kind of glue do we need to use when we reconnect the screen and the case?

Ronen Yudzinsky -

screen replacement is possible without removing the back cover and logic board, similar to the Z1 compact. Simply remove the metal cover once you took the screen off to disconnect the lcd/digi cable.

Toby Liedke -

Yeah, I'm confused as to why everything from the back needs to be taken out, when you have to heat up the front sticker anyways and disconnect it. Seems fairly simple to just heat up, cut side adhesive, lift, unplug.

Brian Santero -

Have you done the repair that way, Toby Liedke?

jesinisterra -

nice guide, for my first reparation, all was fine. Thanks!

bvo -

I tried to repair it from the front, the problem with that is you would have to do some damage to the metal that lies between the LCD screen assembly and the motherboard assembly. The actual connection for the cables lies behind it, hence the approach from the back cover which leads to taking the whole thing apart anyway. This was my first time, I did it 'cause I really like the phone and I really don't feel any need of getting another one yet.

Zheng Serra -

If you break your touchscreen digitizer, DO NOT buy the separate digitizer thinking it's cheaper. I made this mistake only to find that the LCD is glued permanently to the digitizer and it's impossible to separate them even after heating. Broke the LCD. Definitely buy the entire LCD+digitizer assembly.

Hwa Shi-Hsia -

I'm still having trouble - I bought an LCD+digitizer and have put the new one in. The touchscreen still doesn't respond. I've checked all the connections and all seem secure, including the small square one on the back of the LCD in step 9, figure 3 that's not mentioned. Any idea which is the actual connection of the digitizer? Thanks.

Hwa Shi-Hsia -

Never mind, just needed a reboot. Whew!

Hwa Shi-Hsia -

Hi

Did you buy the LCD+digitizer from here?

It was a new product?

It works fine?

I would like tu buy it but i´m not so sure... tell me yor experience.

Thanks!!

(sorry for my English. I´m from Mexico.)

Hugo Rasek (SoyRasek) -

Hi guys,

I just finished to replace the dislplay following perfectly the guide, everything looks good but I found a problem that I do not understand. During a call the screen becomes black and even pushing all buttons it doesn't work, only when the call is ended it turns to normal. Anyone can explane me why? And how I can fix it? Reboot the phone?

Tnx guys

Willy Di Bella -

You should check proximity sensor, when you place call it should detect that you've placed phone close to ear and shut off screen to prevent you accidentaly pressing something on screen while you talking. By way you describing it, it looks like proximity sensor is triggered all the time, it can be because of bad quality replacement LCD, something that left between proximity sensor and glass. You should check that, also there is some software solution that can help:

https://talk.sonymobile.com/t5/Xperia-Z-...

Srpko Vukovic -

Thanks Srpko,

I will try to get in the Agent Menu and Test the Proximity Sensor, in anycase could be the LCD which is not of high quality because of the Owner request of a chipper solution but it looked strange in anycase seen that during mz first check it worked correctly during a receiving call.

I will let you know if I solved the problem with this procedure .

Tnx Again for your answer

Willy Di Bella -

What should I use to heat up the front and back cover? Can I use a hair dryer?

Karmonhcm Lin -

Youtube video linked shows removal of earpiece speaker, which is totally unnecessary for this procedure. Wound up breaking the speaker while trying to remove it.

Patrick -

I bought the display adhesive strips from iFixit but I cannot get the display assembly to adhere to them. How do I do this?

Patrick -

i buy a new display touch screen. i replaced it and now the phone doesn’t turn on. (tilt) even if i connect the old display nothing happend.

only if the display connector is diconnected the phone turns on.

somebosy knows why?

meanwhile i buy the same phone again and the same happaning again.

so i have 2 xperiaz5 that turns on only with the disconnectet xonnectro of tghe display =(

mn_nt -

Full tear down guide not screen replacement guide.

Patrick -