Samsung Epic 4G Touch Motherboard Assembly Replacement

Escrito Por: Walter Galan
  • Comentarios: 0
Samsung Epic 4G Touch Motherboard Assembly Replacement

Dificultad

Moderate

Pasos

5

Tiempo Requerido

No hay estimado

Introducción

Motherboard prerequisite only.

  1. tqpWq6IPq1jpNCDY
    tqpWq6IPq1jpNCDY
    Omklc6AifpNw6HwJ

    • Use the flat end of a spudger to disconnect the front-facing camera cable connector.

  2. dOUFBZR4iDj2lqhc

    • Carefully disconnect the digitizer display cable.

  3. viTWtCu66o4yMvQP

    • Use a spudger to disconnect the display cable connector.

  4. fm2NZpFvfF5uSUpW

    • Remove the two 3 mm Phillips #00 screws.

  5. KCWDY1GlhYsDInuo
    KCWDY1GlhYsDInuo
    LE5ooosvdAB1Wu2X
    3VsG5VREFHQQwKfN

    • Lift the micro-USB end of the motherboard away from the display assembly and pull it down.

    • Be mindful that you don't snag the motherboard on any cables as you remove it.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

Walter Galan

685928 Reputación

0 comentarios