ZTE Lever Rear Camera Replacement

Escrito Por: Michael Gonzalez
  • Comentarios: 0
ZTE Lever Rear Camera Replacement

Dificultad

Moderate

Pasos

9

Tiempo Requerido

15 minutos

Introducción

Follow this guide to do a rear camera replacement on your ZTE Lever smart phone.

  1. c3JqaLTXpJpmEGhN

    • Remove the SD card and the Sim card from the device.

    • The Sim and SD cards are not shown here as our device did not come with them.

  2. ZUlMEHcKWY1BXqTM
    ZUlMEHcKWY1BXqTM
    Af5ZUELBMBXY2RMu

    • Use an iFixit opening tool to separate the back from the device.

  3. FIR2patmhFWAeDjW
    FIR2patmhFWAeDjW
    lbj3chyP52KxBshT

    • Remove the two 1.6mm Phillips #0 screws from the battery plug cover.

    • Remove the cover.

  4. 4C4IK22ZrvyQbYfv
    4C4IK22ZrvyQbYfv
    LUMR1PyO3JpVkGjb

    • Disconnect the battery cable from the motherboard with a plastic opening tool.

  5. bKBbOqRBaiuVDpfI

    • Use your hands, or a plastic opening tool, to pry the battery from the phone.

  6. RPTBm61JqKDj4nKw

    • Remove the three 1.6mm Phillips #0 screws from the plastic cover on the motherboard.

  7. fVo2VvvYSLHpKTNG
    fVo2VvvYSLHpKTNG
    Qn5KbVqFyGdIKZWa
    wPZmdklAh3rewlJR

    • Remove the top plastic motherboard cover using a plastic opening tool.

  8. DnUmRhvJ4N1lYGer
    DnUmRhvJ4N1lYGer
    qIrOQyXvZeEMYFXa

    • Using a plastic opening tool, disconnect the camera from the motherboard.

  9. 5gP34ErbtEK1K3NJ

    • Remove the camera from the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

Michael Gonzalez

Miembro Desde 29/01/18

501 Reputación

0 comentarios