ZTE Tempo X Charging/Aux Board Replacement

Escrito Por: Conager Robb
  • Comentarios: 0
ZTE Tempo X Charging/Aux Board Replacement

Dificultad

Moderate

Pasos

6

Tiempo Requerido

10 - 15 minutos

Introducción

Use this guide to replace the charging/AUX board in your ZTE Tempo X smartphone.

  1. axAZNuRYBuQQacY3
    axAZNuRYBuQQacY3
    kNft1ICjgIa1sLmv

    • Remove back cover using the divot provided.

  2. jZcNoRLLphN3MTe6
    jZcNoRLLphN3MTe6
    5MODTTo4ejEXAdK5

    • Find the divot near the bottom of the battery and remove the battery from the device.

  3. 4pg5To3FW13sHqCk
    4pg5To3FW13sHqCk
    NvDevPZyiH2JJv2P

    • Remove the sixteen 3mm screws using the Phillips #000 screwdriver.

  4. XgXUfx3xJVBMiHJH
    XgXUfx3xJVBMiHJH
    YQjnjO3RJbMHN2rf

    • Take off the second back cover, lifting from the bottom of the device to the top.

  5. YiagtTTXtOWQb1vJ
    YiagtTTXtOWQb1vJ
    DBEh3VoBIquRXcFi
    uhKMaf3nmAE3KKvy

    • Using a spudger, unclip the board from the phone at the places highlighted.

  6. eCelvyTNjZwuVnG6
    eCelvyTNjZwuVnG6
    5apQkUBWKuKMNdWl
    wLT2STbhWUBv4It2

    • Use the spudger to remove the board from the phone.

    • The board is held by glue so there will be resistance when detaching it from the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

Conager Robb

Miembro Desde 21/09/18

592 Reputación

0 comentarios