iPad Mini 3 Wi-Fi Antenna Cable Tape Replacement

Escrito Por: Sam Goldheart
  • Comentarios: 0
iPad Mini 3 Wi-Fi Antenna Cable Tape Replacement

Dificultad

Moderate

Pasos

3

Tiempo Requerido

No hay estimado

Introducción

Prereq only.

Herramientas

  1. UWNAdAkM42sCGyDD
    UWNAdAkM42sCGyDD
    AZ4HAkRIxHjENLhk

    • Use the tip of a spudger to peel the tape off of the antenna cables near the logic board.

  2. CjTjfaK5sIdFM1kN
    CjTjfaK5sIdFM1kN
    AjP1xRJXelpu5F3G

    • Use the point of a spudger to separate the adhesive holding the antennas to the right speaker.

  3. WBOUKfykOMXfexEt
    WBOUKfykOMXfexEt
    Qrlxt2UO3LnqJJVA

    • Use the point of a spudger to lift the antenna cable adhesive up off the rear case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

Sam Goldheart

Miembro Desde 19/10/12

457951 Reputación

0 comentarios